Minor but crucial custom here:
Parts needed:
1 Universe 2.0 Hound
1 Gun from Classics deluxe Optimus Prime
1 3/16 drill bit (Sorry, I only use imperial sizes you metric folk)
1 steady hand
1 sure eye
1 camera that only takes grainy pics on the close up.
Ultra Magnus's Modifications
Moderator: Blackjack
- Time Traveller
- Father Time (Admin)
- Posts: 6470
- Joined: Mon Dec 29, 2003 1:12 am
- Location: 90482 Orcus
- Contact:
- Ultra Magnus
- Big Daddy
- Posts: 1560
- Joined: Fri Jun 01, 2007 2:10 pm
- Location: Autobot City
- Catalyst Prime
- Gestalt Warrior
- Posts: 378
- Joined: Mon Mar 16, 2009 5:55 am
- Location: Oklahoma
- Ultra Magnus
- Big Daddy
- Posts: 1560
- Joined: Fri Jun 01, 2007 2:10 pm
- Location: Autobot City
One thing... there are two "support beam" molded into the underside of that piece. Make sure you are drilling between them.Rumble wrote:
@Magnus: Thats a neat idea, I like it alot. Good work, I know what I will be doing if I get a hound.
Rumble.
I am not sure as to what will happen if you snap one, but I don't want to find out either!
If you are one of those metric users that I mentioned earlier, they way I figured out the proper size drill bit was by insert the bits, one at a time into Hounds hand until one did not fit. When the one did not fit, I went back to the last size that did fit. This should be the right size to mount the cannon to the back.
Have fun, but don't go crazy with the drill.... light taps on the power, or you will knock the entire foot off permanently.