Swindles Switches

Swindle · Post by **Swindle** » Tue Jul 27, 2010 11:50 pm

Hi all I just thought I would take a crack at customizing Transformers but before I begin I need to know if there is a way to remove pins without damaging the figure.

Swindle · Post by **Swindle** » Wed Jul 28, 2010 12:39 pm

Pins or no pins I'm starting on Ironhide and I have a few tricks up my sleeve, mainly turning his guns into G1 style guns.

Post by **Minerva** » Wed Jul 28, 2010 2:43 pm

Sounds very interesting! I'm looking forward to see the result!

As for removing pins:

Minerva wrote:See if you can find something small and pointy to carefully push the pin out. The pin is ridged on either one or two sides, so if pushing it from one side doesn't work, just try the other side.
If you're unsure how this works you could try removing a pin on another figure (a junker or something), just to practice.

Well, that's how I do it anyway. Maybe someone else has a better idea?

skywarp408 · Post by **skywarp408** » Wed Jul 28, 2010 8:20 pm

nail and a hammer might work. it also might break the figure. i would be carefull.

Swindle · Post by **Swindle** » Fri Jul 30, 2010 8:06 am

Thanks I will have try those.

In the G1 show didn't Ironhide have an alternate hand/gun that shot liquid nitrogen or something of that sort that he used in an episode or two if so could someone find me pictures please.
Thanks.

Silverbolt · Post by **Silverbolt** » Sun Aug 01, 2010 2:20 am

Fingers

and because I found it when I was looking for the fingers.

REAL IRONHIDE!

Swindle · Post by **Swindle** » Sun Aug 01, 2010 6:02 pm

Ok thanks Silverbolt.

Does any body have any spare TF heads this is for a different project.