Page 1 of 1

seekers

Posted: Thu Aug 06, 2009 4:55 pm
by LD2062
I just want to check. Is there any differences between seeker landing gear or black hands? So can I group them with whatever incompletes I've got?

Posted: Thu Aug 06, 2009 11:01 pm
by Banzai-Tron
Not really for either. The only *significant* difference is single versus double tabbed fists. Though, if you want to get all nitpicky and OCD about it, head over to Fred's Workshop for the ultimate lesson in "wow, you've spent way too much time thinking about this".

http://www.geocities.com/futuristgroup/vjet.html#fists

Posted: Fri Aug 07, 2009 12:02 am
by Jose
If you are really sure on where you want to go, about the fists: The cast number varies, I have found them up to #8 or so.

Posted: Fri Aug 07, 2009 2:04 am
by LD2062
Okay, that didn't clear things up.

I got a set of fists today in a group of transformers. They came with 1 of each of his wing types thundercraker's, a small missile and a landing gear.

But they are single tabbed on the outside of the wrist with a small circle and I don't see and cast number. Where should that be.

Posted: Fri Aug 07, 2009 9:48 am
by Jose
They are on the double tabbed ones, near the wrist - I just went to check and found a #11.

Posted: Fri Aug 07, 2009 1:37 pm
by Banzai-Tron
That link I provided goes into MUCH detail about those tab #'s. (and provides pics!)

Posted: Fri Aug 07, 2009 6:06 pm
by LD2062
I went through the link, but he referred to single tabbed as being inside the wrist, these are outside.

Posted: Sat Aug 08, 2009 4:14 pm
by Banzai-Tron
I think... single tabbed fists are ALWAYS on the outside of the wrist?
EDIT: Oh, I see, first sentence, lol. Darn speed-reading. I don't think he means "inside wrist" like we mean inside wrist. I imagine he means "the tabs are cut into the wrist area (in general). Or he made a typo. Anyhow, clearly, to my knowledge, ALL single tabbed fists have the tabs cut into the "outside" of the wrist.

http://www.geocities.com/futuristgroup/manyjetfists.jpg

(Every instance in that link where you don't see a tab is a single tabbed fist. And they're all on the outside)

And there's not always a number.

Posted: Sat Aug 08, 2009 4:44 pm
by LD2062
Excellent, I was beginning to worry they were ko.

Posted: Tue Aug 18, 2009 12:39 am
by LD2062
Another question.

I've got several skywarp wings and it seems some of them have a longer stem to attach them. Except the longer ones don't allow the wings to fit flush to the body I have.

Posted: Tue Aug 18, 2009 2:08 am
by Minerva
There are several variations of wings and fins for the seeker jets. I'd like to believe that the short-pegged came before the long-pegged ones (someone, correct me if I'm wrong!).
Have a look here for more information:
http://www.geocities.com/futuristgroup/ ... #mainwings

Posted: Tue Aug 18, 2009 8:51 pm
by Jose
LD2062 wrote:Another question.

I've got several skywarp wings and it seems some of them have a longer stem to attach them. Except the longer ones don't allow the wings to fit flush to the body I have.
Wings: Check the underside, on the long part parallel to the body; if hollow, it's a later version, if filled, it's the early version.

Body: Early ones have no copyright stamp and should have a smooth canopy (have found only the first three with this type; canopies can be removed); later bodies have copy stamps and ribbed canopies.

Posted: Tue Aug 18, 2009 9:26 pm
by LD2062
Well the wings and body I added to the lot of other accessories. They are both later versions going by what you said. Actually I think I swapped in the later version canopy since I think it looks better than the smooth version.